Oil-Core
All of the major oil companies maintain core testing labs whose job it is to evaluate the oil producing potential of a given field based on the evaluation of oil cores. An oil core is a sample of the oil-bearing rock as obtained from exploratory drilling.
Features :
- Dimensional accuracy
- Rigid construction
- High tensile strength
Specification :
- Standard:AFNOR, ASTM, BS, CSN, DIN, GOST, IS, ISO, JIS, SI, SIS, UNI.
- Grades(IS): CI FG-150, Cl FG-200, Cl FG-260, Cl FG-300, Cl FG-350, Cl FG-400.
Range :
- By Weight: Up to 120 KG single piece in machine moulding
- By Size: Up to 600 (L) X 800 (W) X 500 (H) mm
- As per Drawing / Sample / Pattern
Stainless-Steel-Mould-Core
A core is a preformed, bonded, sand insert placed into the mold to shape the interior of a casting or a part of the casting that cannot be shaped by the pattern. Cores are frequently used to create hollow sections or cavities in a casting.
Features :
- Dimensional accuracy
- Rigid construction
- High tensile strength
Specification :
- Standard:AFNOR, ASTM, BS, CSN, DIN, GOST, IS, ISO, JIS, SI, SIS, UNI.
- Grades(IS): CI FG-150, Cl FG-200, Cl FG-260, Cl FG-300, Cl FG-350, Cl FG-400.
Range :
- By Weight: Up to 120 KG single piece in machine moulding
- By Size: Up to 600 (L) X 800 (W) X 500 (H) mm
- As per Drawing / Sample / Pattern
CO2-Core
CO2 cores most preferred cores in the foundry. This methodology involves the spreading of silica sand and sodium silicate mixture layer by layer and then passing of controlled CO2 gas over the layer as per cad data. CO2 gas cures the mixture within 20 to 40 seconds depending on the size of cores.
Features :
- Dimensional accuracy
- Rigid construction
- High tensile strength
Specification :
- Standard:AFNOR, ASTM, BS, CSN, DIN, GOST, IS, ISO, JIS, SI, SIS, UNI.
- Grades(IS): CI FG-150, Cl FG-200, Cl FG-260, Cl FG-300, Cl FG-350, Cl FG-400.
Range :
- By Weight: Up to 120 KG single piece in machine moulding
- By Size: Up to 600 (L) X 800 (W) X 500 (H) mm
- As per Drawing / Sample / Pattern
Molusis-Core
Nobake is a casting process that involves the use of chemical binders to bond the molding sand. Sand is conveyed to the mold fill station in preparation for filling of the mold. A mixer is used to blend the sand with the chemical binder and catalyst.
Features :
- Dimensional accuracy
- Rigid construction
- High tensile strength
Specification :
- Standard:AFNOR, ASTM, BS, CSN, DIN, GOST, IS, ISO, JIS, SI, SIS, UNI.
- Grades(IS): CI FG-150, Cl FG-200, Cl FG-260, Cl FG-300, Cl FG-350, Cl FG-400.
Range :
- By Weight: Up to 120 KG single piece in machine moulding
- By Size: Up to 600 (L) X 800 (W) X 500 (H) mm
- As per Drawing / Sample / Pattern